Scotle Ir6000 V4 Software 19
Click Here - https://ssurll.com/2tywj8
How to Use Scotle IR6000 V4 Software 19 for BGA Rework
If you are looking for a reliable and easy-to-use software for your Scotle IR6000 V4 BGA rework station, you might want to check out Scotle IR6000 V4 Software 19. This software is designed to help you control the temperature and time settings of your rework station, as well as monitor the reflow process in real time.
In this article, we will show you how to install and use Scotle IR6000 V4 Software 19 on your computer, and how to run a profile for your BGA rework. We will also share some tips and tricks to get the best results from your Scotle IR6000 V4.
How to Install Scotle IR6000 V4 Software 19
Before you can use Scotle IR6000 V4 Software 19, you need to install it on your computer. Here are the steps to do that:
Download Scotle IR6000 V4 Software 19 from the official website or from a trusted source. Make sure you have the latest version of the software.
Extract the zip file to a folder on your computer. You will see a file named "Setup.exe". Double-click on it to start the installation process.
Follow the instructions on the screen to complete the installation. You may need to restart your computer after the installation is finished.
Connect your Scotle IR6000 V4 rework station to your computer using a USB cable. Make sure the rework station is turned on and in standby mode.
Launch Scotle IR6000 V4 Software 19 from your desktop or start menu. You should see a window like this:
If you see a message saying "Device not connected", check your USB connection and make sure your rework station is turned on and in standby mode.
How to Use Scotle IR6000 V4 Software 19
Once you have installed and launched Scotle IR6000 V4 Software 19, you can start using it to control and monitor your rework station. Here are some of the main features and functions of the software:
The Temperature tab shows you the current temperature of the upper and lower heaters, as well as the target temperature for each heater. You can adjust the target temperature by clicking on the arrows or typing in the numbers. You can also switch between Celsius and Fahrenheit units by clicking on the C/F button.
The Time tab shows you the current time and duration of each stage of the reflow process, as well as the target time for each stage. You can adjust the target time by clicking on the arrows or typing in the numbers. You can also pause or resume the timer by clicking on the Pause/Resume button.
The Profile tab shows you a graph of the temperature and time settings for each stage of the reflow process. You can create, edit, save, load, or delete profiles by using the buttons at the bottom of the tab. You can also export or import profiles as CSV files by clicking on the Export/Import button.
The Data tab shows you a table of the temperature and time data recorded during each stage of the reflow process. You can save, load, or delete data by using the buttons at the bottom of the tab. You can also export or import data as CSV files by clicking on the Export/Import button.
The Status tab shows you some information about your rework station, such as model number, serial number, firmware version, etc. You can also update your firmware by clicking on the Update button.
The Settings tab allows you to customize some options for your software, such as language, sound, alarm, etc. You can also calibrate your temperature sensors by clicking on the Calibrate button.
How to Run a 061ffe29dd