HDD Low Level Format Tool V4.12

How to Use HDD Low Level Format Tool v4.12 to Erase and Format Your Hard Disk Drive

If you want to completely wipe out your hard disk drive and start from scratch, you may need to use a low-level format tool. A low-level format tool is a software that erases all the data on the disk, including partitions, file systems, and MBR data. It also re-certifies the disk by marking any bad sectors as unusable.

One of the most popular and reliable low-level format tools is HDD Low Level Format Tool v4.12. This tool is free for personal and home use, and it supports a wide range of interfaces and manufacturers. It can also format flash cards using a card-reader.

In this article, we will show you how to use HDD Low Level Format Tool v4.12 to erase and format your hard disk drive in a few simple steps.

Step 1: Download and Install HDD Low Level Format Tool v4.12

You can download HDD Low Level Format Tool v4.12 from the official website: http://hddguru.com/software/HDD-LLF-Low-Level-Format-Tool/. There are two versions available: a Windows installer and a portable executable. You can choose the one that suits your needs.

If you download the installer, run it and follow the instructions to install the tool on your computer. If you download the portable executable, unzip it to a folder of your choice and run it from there.

Step 2: Connect Your Hard Disk Drive or Flash Card to Your Computer

Before you run the tool, make sure you connect your hard disk drive or flash card to your computer. You can use any interface that is supported by the tool, such as SATA, IDE, SCSI, SAS, USB, or FIREWIRE.

WARNING: After running this low level format tool, the whole disk surface will be erased. Data restoration is impossible after using this utility! Make sure you backup any important data before proceeding.

Step 3: Run HDD Low Level Format Tool v4.12 and Select Your Device

Run HDD Low Level Format Tool v4.12 from the Start menu or from the folder where you extracted it. You will see a window like this:

Select your device from the list of available devices. You can see the device name, model, serial number, size, and interface type. Click on Continue.

Step 4: Choose Low-Level Format Tab and Click on Format This Device

You will see a new window with four tabs: Low-Level Format, S.M.A.R.T., Volume Info, and MBR Tools. Choose the Low-Level Format tab.

Click on Format This Device button at the bottom of the window. A confirmation dialog will appear. Click on Yes to start the low-level format process.

Step 5: Wait for the Process to Complete

The low-level format process will take some time depending on the size and speed of your device. You can see the progress bar and the estimated time remaining at the bottom of the window.

When the process is complete, you will see a message saying \"Format Completed Successfully\". Click on OK to close the window.

Step 6: Optionally Create Partitions and File Systems on Your Device

After you have performed a low-level format on your device, it will be completely blank and unformatted. You will need to create partitions and file systems on it before you can use it for storing data.

You can use any partitioning and formatting tool of your choice, such as Windows Disk Management, Diskpart, or third-party software. Alternatively 061ffe29dd